Summary of Contents for Grandstream Networks GXW4104
Page 1
Grandstream Networks, Inc. Analog IP Gateway GXW410x 4 or 8 FXO Ports w/Video Surveillance GXW410x User Manual www.grandstream.com Firmware Version 1.0.1.8 support@grandstream.com...
FIRMWARE UPGRADE ..........................28 HTTP ............................28 PGRADE THROUGH TFTP ............................28 PGRADE THROUGH Download TFTP Server............................29 RESTORE FACTORY DEFAULT SETTING....................30 EXAMPLES OF GXW410X CONFIGURATIONS ..................31 Grandstream Networks, Inc. GXW410x User Manual Page 2 of 33 Firmware 1.0.1.8 Updated: 07/2008...
Page 3
3. S CREENSHOT OF HANNELS ONFIGURATION 4. S FXO L CREENSHOT OF INES ONFIGURATION 5. S CREENSHOT OF ROFILE ONFIGURATION 6. S CREENSHOT OF TATUS ONFIGURATION Grandstream Networks, Inc. GXW410x User Manual Page 3 of 33 Firmware 1.0.1.8 Updated: 07/2008...
ELCOME Thank you for purchasing the Grandstream GXW410x IP Analog FXO Gateway. The GXW410x is a cost effective, easy to use and easy to configure IP communications solution for any business. The GXW410x gateway supports popular voice codecs and is designed for full SIP compatibility and interoperability with party SIP providers, thus enabling you to fully leverage the benefits of VoIP technology, integrate a traditional phone system into a VoIP network, and efficiently manage communication costs.
Power adapter connection OFF/ON Off/On switch FXO1 - FXO8 FXO ports to be connected to physical PSTN lines from a traditional PSTN PBX or PSTN Central Office. Grandstream Networks, Inc. GXW410x User Manual Page 5 of 33 Firmware 1.0.1.8 Updated: 07/2008...
OFF while the new files are written. The entire process may take between 20 to 30 minutes. The firmware upgrade is complete when you can login into the web configuration pages. Grandstream Networks, Inc. GXW410x User Manual Page 6 of 33 Firmware 1.0.1.8...
IP/LAN IP/WAN GXW-410x Grandstream IP Phones PSTN Analog endpoints For incoming calls from the PSTN analog endpoints to the GXW410x gateway, the device will auto forward each call to a configured IP extension. The SIP Server can then route the call based on its own configuration or IVR system.
FXO Lines, thus reaching the destination PSTN endpoint. On the reverse, incoming calls from the PSTN endpoints connected to the GXW410x gateway will be routed automatically to the analog endpoints connected to the GXW400x gateway. Grandstream Networks, Inc. GXW410x User Manual Page 8 of 33 Firmware 1.0.1.8...
SIP Server - Set it to IP Address of GXW400x SIP Registration - No NAT traversal - No For more information regarding this setup, email Grandstream technical support at support@grandstream.com or visit our User and Developer forum at forums.grandstream.com Grandstream Networks, Inc.
Yes (Detection only). The PSTN lines will need to be subscribed to PR service from the Service Provider. GXW410x: EN55022 Class B, CFR Part 15 Class B, EN55024; GXW4104: FCC, CE (in addition) Safety GXW410x: EN60950-1 GXW4108: UL60950-1 (in addition) Grandstream Networks, Inc. GXW410x User Manual Page 11 of 33 Firmware 1.0.1.8 Updated: 07/2008...
CCESSING THE ONFIGURATION 1. Navigate your browser to: http://www.grandstream.com/DOWNLOAD/IPQuery/IPQuery.zip 2. Run the Grandstream IPQuery tool, that you just downloaded. 3. Click on button in order to begin device detection 4. The detected devices will appear in the Output field USER ONFIGURATION When the Web Configuration Menu is accessed, the GXW410x will respond with a login screen.
Controls how the date/time is displayed according to the specified time zone. Allow DHCP Option 2 Default is No. If set to Yes, time zone settings will originate from the DHCP server. to override Time Zone Settings Grandstream Networks, Inc. GXW410x User Manual Page 13 of 33 Firmware 1.0.1.8 Updated: 07/2008...
This field shows system up time since the last reboot. Registered This field indicates whether the different SIP Accounts configured under Channels page are successfully registered to the SIP server(s). Grandstream Networks, Inc. GXW410x User Manual Page 14 of 33 Firmware 1.0.1.8...
Page 15
This field shows whether the PPPoE connection is running if connected to DSL modem. Detected NAT Type This field shows what kind NAT the GXW410x is connected to via its WAN port. It is based on STUN protocol. Grandstream Networks, Inc. GXW410x User Manual Page 15 of 33 Firmware 1.0.1.8...
Use NAT IP NAT IP address used in SIP/SDP message. Default is blank. STUN Server IP address or Domain name of the STUN (Simple Traversal of UDP through NATs) server. Grandstream Networks, Inc. GXW410x User Manual Page 16 of 33 Firmware 1.0.1.8...
Page 17
Via HTTP Server The URL for the HTTP server used for firmware upgrade and configuration via HTTP. For example, ttp://provisioning.mycompany.com:6688/Grandstream/1.0.0.54 Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be omitted if using default port 80.
Page 18
In order to view this video feed, please follow instructions given under Video Surveillance chapter on page 23. RTSP Port By default it is 554. Grandstream Networks, Inc. GXW410x User Manual Page 18 of 33 Firmware 1.0.1.8 Updated: 07/2008...
Default is Yes. When set to Yes, the gateway will recognize dial-tone from the Central Office (CO) before it completes call. If you can’t make an outbound call, set this is No. Grandstream Networks, Inc. GXW410x User Manual Page 19 of 33 Firmware 1.0.1.8...
Page 20
This setting allows you to make several options related to facsimile. You can select the method: T.38 or Pass through (G711) You can select the fax transmission rates (2400/4800/7200/9600/12000/14400bps) You can enable or disable ECM (Error Checking Mode) Grandstream Networks, Inc. GXW410x User Manual Page 20 of 33 Firmware 1.0.1.8...
If set to “No”, this feature is disabled. Echo Cancellation When set to Y, Echo cancellation is enabled. Channel specific Setting Channel specific settings mentioned below. Grandstream Networks, Inc. GXW410x User Manual Page 21 of 33 Firmware 1.0.1.8 Updated: 07/2008...
Page 22
Syntax to USE this feature: prefix# (that is 99) + ch# (could be anything from 1 to 8) + dialing# will result in this call forwarded to FXO port (ch#) immediately. Grandstream Networks, Inc. GXW410x User Manual Page 22 of 33 Firmware 1.0.1.8...
SIP Server. The default setting is “Yes”. Unregister on Default is No. If set to yes, the SIP user’s registration information will be cleared on reboot. Reboot Grandstream Networks, Inc. GXW410x User Manual Page 23 of 33 Firmware 1.0.1.8 Updated: 07/2008...
Page 24
Early Dial Default is No. Use only if proxy supports 484 response. Session Expiration Grandstream implemented SIP Session Timer. The session timer extension enables SIP sessions to be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE. Once the session interval expires, if there is no refresh via a UPDATE or re-INVITE message, the session will be terminated.
The administrator can remotely reboot the unit by pressing the “Reboot” button at the bottom of the configuration menu. The following screen will indicate that rebooting is underway. The user can re-login to the unit after waiting for about 30 seconds. Grandstream Networks, Inc. GXW410x User Manual Page 25 of 33 Firmware 1.0.1.8...
5. If the viewer is under NAT, go to Preferences->Demuxers->Access modules->RTP/RTSP, check “Advanced options” in the bottom. The option “Use RTP over RTSP (TCP)” will show. Check that option box. (Grandstream does NOT recommend this network environment) 6. Close the Preferences window and go to File->Open Network Stream:...
7: S IGURE CREEN SHOT OF IDEO URVEILLANCE * PC client side running VLC as monitoring station Grandstream Networks, Inc. GXW410x User Manual Page 27 of 33 Firmware 1.0.1.8 Updated: 07/2008...
HTTP server. It can also be in IP address format. “:6688” is the TCP port the HTTP server listening to, default http server listens to port 80. “/Grandstream/1.0.1.2 is the RELATIVE directory to the root dir on HTTP web server.
OWNLOAD ERVER For users who do not have a local TFTP server, Grandstream provides a NAT-friendly TFTP server on the public Internet for users to download the latest firmware upgrade automatically. Please check the Services section of Grandstream’s Web site to obtain this TFTP server IP address. Alternatively, user can download and install a free TFTP or HTTP server in his LAN for a firmware upgrade.
Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider.
Scenario: a small business with traditional analog PBX lines and broadband access who want to extend their traditional PBX to virtually anywhere in the world, using the internet. (Any SIP End point, such as Grandstream BugeTone, HandyTone, GXP-2000 or GXV-3000 are needed in this scenario) Company A...
IP- IP C PPLICATION SING A OMMUNICATION ONFIGURATION Scenario Four: The GXW410x offers an IP to IP pure IP Communications System configuration, where all locations use IP phones. Grandstream Networks, Inc. GXW410x User Manual Page 32 of 33 Firmware 1.0.1.8 Updated: 07/2008...
Page 33
IPPBX or IPPBX or SIP Server SIP Server IP/LAN IP/LAN GXW 410x GXW 410x Grandstream IP Phones Grandstream IP Phones Branch B – Denver, CO 4 employees Anywhere in the world Grandstream Networks, Inc. GXW410x User Manual Page 33 of 33 Firmware 1.0.1.8...