Viewing Gxe Status And Reporting Information; Gxe Current Status Information - Grandstream Networks GXE5024 User Manual

The following actions can be performed in this section.
Add: Click on the Add button. The peer system details page will be displayed, allowing
you to enter connectivity details for this peer system:
- PeerURL: Enter the IP address or domain name of the peer system.
- Trunk Number: The number of concurrent calls that can used on the peer.
- Prefix: Configure the prefix digit on outbound calls to recognize this peer system as
the destination. When the call is sent to this peer system, the prefix digit is not
removed as it is when dialing out other trunks. You may specify multiple prefixes for
a peer system by separating them with a semicolon (i.e. 6;7).
- IPPBX Number: Enter a unique number to identify the remote peer system.
- Heart Beat: Enable or disable availability detection of the remote peer system
(requires compatibility on the remote end).
When done, click on the Submit button to add the extension or Cancel to go back.
Modify: Click on the Modify button to the right of the row displaying information for the
peer system you wish to modify. The peer system details page will be displayed,
allowing you to modify all of the peer system's settings. When done, click on the
Submit button to save your changes or Cancel to go back.
Delete: Click on the Delete button on the far right of the row displaying the information
for the peer system you wish to delete. You will be prompted for confirmation via a
dialog box; click OK to confirm or Cancel to go back.

10. Viewing GXE Status and Reporting Information

GXE current status information

-
In the Status menu, the following categories of GXE status information are displayed.
Version .02
GXE502x User Manual 2/26/2008
30