Configuring Port Forwarding; Configuring System Settings; Setting The Web Ui Login Password; Storing Administrator Contact And Information - Grandstream Networks GXE5024 User Manual

If the WAN-port IP of the GXE is dynamically assigned, you may use Dynamic DNS
to assign it a fixed domain name which is always synchronized with the IP address
of your GXE. Enable Dynamic DNS by setting the DDNS Active setting to Enable
and setting the DDNS ISP type, site name, and account and password information in
the provided fields. If not using Dynamic DNS, set the DDNS Active setting to
Disable.

Configuring port forwarding:

The GXE can be configured to perform port forwarding. In the Port Forwarding
settings, enter the port to forward from the WAN-side, the LAN-side device IP
address to forward to, the LAN-side device port to forward to, and the protocol (TCP,
UDP, or both) to forward in the respective fields.
When done, click on the Submit button to save your changes.

Configuring system settings

-
The System Setting section contains various important internal system settings and allows
configuration of several features and functions of the GXE. The below actions and their
associated settings appear in order from top to bottom on the GXE web UI as well.

Setting the web UI login password:

To change the password for accessing the GXE web configuration pages, enter a
new password in the Login Password field. Do not lose this password. For further
security, you may disable WAN-side web UI access in the Networking Setting
section.

Storing administrator contact and information:

Version .02
GXE502x User Manual 2/26/2008
23