Setting Performance View Preferences; Setting The Polling Frequency; Preferences Dialog Box-Performance View - Qlogic 5800V Series User Manual

6–Managing Ports
Graphing Port Performance

Setting Performance View Preferences

To set Performance View preferences:
1. On the File menu, click Preferences to view the Preferences dialog box
(Figure
Figure 6-12. Preferences Dialog Box—Performance View
2. Set the following preferences:




3. Click OK.

Setting the Polling Frequency

Performance View updates the graphs once per second by default.
NOTE:
System performance decreases as more graphs are opened. To improve
system performance, increase the polling frequency (higher number of
seconds between polls), tile the graphs (fastest refresh time), or both. For
information on the arrangement and size of graphs in the display, see
"Arranging Graphs in the Display" on page
6-28
6-12).
Working Directory—change the location of the working directory in
which to save files.
Browser Location—change the location of the browser used to view
the online help.
Auto Load and Auto Save Graphing Environment—when enabled,
Performance View prompts you to save and load the default fabric file
between sessions. For more information on the default Fabric View
file, see "Exiting Performance View" on page
Display When Making Non-Secure Connections—when enabled, the
Non-Secure Connection Check dialog box appears when you attempt
to open a non-secure fabric. You then have the option of opening a
non-secure fabric. If this option is disabled, you cannot open a fabric
with a non-secure connection.
6-26.
6-30.
59266-01 B