Qlogic 5800V Series User Manual page 135

Login Level
Super User
UserAuthentication
Enabled
Firmware Version
Inactive Firmware Ver-
sion
Pending Firmware Ver-
sion
PROM/Flasher Version
NTP Client Enabled
NTP Server Address
FDMI Enable
FDMI HBA Entry Limit
Embedded GUI
Enabled
Inactivity Timeout
GUI Mgmt Enabled
Telnet Enabled
59266-01 B
Table 5-1. Switch Data Window Fields (Continued)
Field
Authority level of the user name
Super user privileges Enabled or Disabled
Enforcement of account names and authority (always True)
Active firmware version
This field does not apply to this switch
Firmware version that is activated at the next reset
Installed version of PROM firmware
Enables switches to synchronize their time to a centralized
server. Enabled or Disabled.
IP address of the centralized NTP server. Ethernet connection
to NTP server is required.
Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management Server
functions. If FDMI is Enabled on the entry switch, Enterprise
Fabric Suite reports all FDMI information reported by the entry
switch.
Maximum number of HBAs that can be registered with a
switch
Web applet status. Indicates whether the web applet on the
switch is Enabled or Disabled.
Number of minutes the switch waits before terminating an idle
command line interface (CLI) session. Zero (0) disables the
timeout threshold.
Web applet status. If this option is disabled, the switch cannot
be managed using the web applet.
Telnet client status Enabled or Disabled
Description
Firmware Group
Services Group
5–Managing Switches
Viewing Switch Information
5-11