Qlogic 5800V Series User Manual page 219

Login Count
Logout Count
Long Frame Count
Loop Timeouts
Loss Of Sync
Primitive Sequence Errors
Rx Link Resets
Rx Offline Sequences
Short Frame Count
Total Errors
Total Link Resets
Total LIPs Received
Total LIPs Transmitted
Tx Offline Sequences
Total Rx Frames
Total Rx Words
Total Tx Frames
Total Tx Words
Total RX Errors
Total TX Errors
59266-01 B
Table 6-7. Port Statistics Data Window Fields (Continued)
Field Description
Number of device logins that have occurred on the switch
Number of device logouts that have occurred on the
switch
Number of incidents in which one or more frames greater
than the maximum size (2,136 bytes) are received
Number of loop timeouts. The Loop timeout value
(LP_TOV) is 22 seconds. LP_TOV is used to keep a Loop
from deteriorating due to protocol errors or lost Ordered
Sets.
Number of synchronization losses (>100 ms) detected by
this port. A loss of synchronization is detected by receipt
of an invalid transmission word.
Number of invalid transitions made in the Link State
Machine. Primitives are recognized words that are not
data words.
Number of link resets received from a device
Number of offline sequence primitives received by the
port
Number of incidents in which one or more frames smaller
than the minimum size (24 bytes) are received
Total number of primitive and non-primitive port link errors
Number of link-reset primitives transmitted and received
by the port
Number of loop initialization primitive frames received
Number of loop initialization primitive frames transmitted
Number of offline primitives transmitted by the port
Total number of frames received by the port
Total number of words received by the port
Total number of frames transmitted by the port
Total number of words transmitted by the port
Total number of errors received by the port
Total number of errors transmitted by the port
6–Managing Ports
Viewing Port Information
6-11