Qlogic 5800V Series User Manual page 134

5–Managing Switches
Viewing Switch Information
Test Fault Code
IPv4 Enabled
IPv4 Address
IPv4 Subnet Mask
IPv4 Gateway
IPv6 Enabled
IPv6 Address
IPv6 Gateway
SNMP Enabled
SNMP v3 Security
Enabled
Broadcast Support
NTP Client Enabled
NTP Server Address
DNS Enabled
Configured Local Host-
name
Assigned Hostname
IPv6 Assigned
Address (1–20)
User Name
5-10
Table 5-1. Switch Data Window Fields (Continued)
Field
Code value for the last recorded diagnostic test status
recorded on the switch
Internet Protocol version 4 Enabled or Disabled
Internet Protocol version 4 address
Mask that determines the IP address subnet
Gateway address
Internet Protocol version 6 Enabled or Disabled
Mask that determines the IP address subnet
Gateway address
SNMP Enabled or Disabled
SNMP v3 Security Enabled or Disabled
Broadcast support status. Broadcast support is enabled
(default) or disabled.
NTP Client Enabled or Disabled. If Enabled, this parameter
enables switches to synchronize their time to a centralized
server.
IP address of the centralized NTP server. Ethernet connection
to NTP server is required.
Domain Name Service Enabled or Disabled
Requested hostname for the switch. If a fully qualified domain
name is given, the domain suffix is used as the first suffix in
the DNS search list for DNS lookups performed by the switch.
Actual hostname for the switch. If a fully qualified domain
name is given, the domain suffix is used as the first suffix in
the DNS search list for DNS lookups performed by the switch.
The set of IPv6 addresses assigned by DHCP v6, NDP, or the
switch administrator
Account name
Description
Network Group
User Login Group
59266-01 B