Qlogic 5800V Series User Manual page 133

Administrative State
Configured Admin
State
Beacon Status
Operational State
Administrative State
Configured Admin
State
Beacon Status
Reason for Status
Temperature
Fan 1 Status
Fan 2 Status
Fan 3 Status
Power Supply 1 Status
Power Supply 2 Status
Temperature Failure
Port Shutdown
Warning Temperature
Failure Temperature
POST Status
POST Fault Code
Test Status
59266-01 B
Table 5-1. Switch Data Window Fields (Continued)
Field
Current switch administrative state
Administrative state that is stored in the switch configuration
Switch LEDs are blinking (On) or not blinking (Off).
Switch operational state: Online, Offline, Diagnostic, Down
Current switch administrative state
Administrative state that is stored in the switch configuration
Beacon status. Switch LEDs are blinking (On) or not blinking
(Off).
Reason for the operational state
Internal switch temperature °C
Fan 1 operational status (dual power supply model only)
Fan 2 operational status (dual power supply model only)
Not applicable
Power supply 1 operational status
Power supply 2 operational status (dual power supply model
only)
Non-configurable (always enabled for this switch). All ports
are shut down when the switch temperature exceeds the Fail-
ure Temperature.
Non-configurable temperature threshold, above which a warn-
ing condition alarm is generated
Non-configurable temperature threshold, above which a fail-
ure condition alarm is generated
Current diagnostic state of the switch
Code value for the last recorded diagnostic test result
recorded on the switch
Current diagnostic test status of switch
Description
Status Group
5–Managing Switches
Viewing Switch Information
5-9