Qlogic 5800V Series User Manual page 187

Table 5-15. Call Home Setup Dialog Box Fields (Continued)
Primary SMTP Server
Port:
Secondary SMTP:
Secondary SMTP
Server Address:
Secondary SMTP
Server Port:
Contact Email
Address:
Phone Number:
Street Address:
From Email Address:
Reply To Email
Address:
59266-01 B
Field
Service port number that the primary SMTP server is listening
on to accept connections from SMTP sending agents
Secondary SMTP server. If the primary SMTP is not
enabled/defined, or if there is a failure in communicating with
the primary SMTP server, the Call Home feature uses the sec-
ondary SMTP server to transmit emails.
IP address of the secondary SMTP server
Service port number that the secondary SMTP server is listen-
ing on to accept connection from SMTP sending agents
Email address of the point-of-contact for the switch. This email
address is included in the text of email messages using the
FullText format under the section for Contact Information.
Phone number of the point-of-contact for the switch. This value
is included in the text of email messages using the FullText for-
mat under the section for Contact Information.
Address of the point-of-contact for the switch. This value is
included in the text of email messages using the FullText for-
mat under the section for Contact Information.
Email address that is provided to the SMTP server indicating
the sender of the email being transmitted. In emails sent by
Call Home, this address appears in the message heading as
the From: address. This value is required to send emails. If
there are any problems encountered in routing the email to any
of the intended recipients, the notice of the problem is sent to
this address. It is an important address for receiving email
notices concerning problems.
This address is also the default address used when replies are
sent to an email by a recipient. If the Reply-To: Email address
is supplied it overrides the sending of replies to the From:
Email address by recipients. However, any notifications of
email problems sent by any SMTP server used to route the
message to the final recipient always sends those notifications
to the From: address.
Email address used by mail reading programs to determine
the address to send the reply to the message received. This
value overrides the use of the From: address as the recipient
for a reply message.
5–Managing Switches
Configuring Call Home
Description
5-63