Port Media Status; I/O Streamguard - Qlogic 5800V Series User Manual

6–Managing Ports
Configuring Ports

Port Media Status

To display the port media status:
1. Select a switch or stack in the fabric tree.
2. On the View menu, click View Port Media.
Table 6-13
Media icon
None

I/O StreamGuard

The I/O StreamGuard feature suppresses the Registered State Change
Notification (RSCN) messages on a port basis. I/O StreamGuard should be
enabled only on ports connected to initiator devices. To configure the I/O
StreamGuard:
1. Select a switch in the fabric tree.
2. Select one or more ports in the faceplate display.
3. On the Port menu, click Port Properties to view the Properties dialog box.
4. For each port, select one of the following options in the I/O StreamGuard
column:
6-18
describes the port media types and status.
Table 6-13. Port Media Status
Optical SFP, online (green/black), logged-in, active, and ready to
send data.
Optical SFP, offline (gray/black), not logged-in, active, can receive
signal, but cannot accept a device login
Optical SFP, unlicensed (dark gray/black)
Optical SFP, unknown, unlicensed (dark gray/blue)
XPAK online (green/black), logged-in, active, and ready to send data
XPAK offline (gray/black), not logged-in, active, can receive signal,
but cannot accept a device login
XPAK, unlicensed (dark gray/white)
XPAK, unknown (blue/black)
Empty port; no transceiver installed (gray) or unlicensed transceiver
(dark gray)
Description
59266-01 B