Port Information Data Window-Summary - Qlogic 5800V Series User Manual

Port Address
Administrative Port
Type
Operational Port Type
Administrative Port
State
Operational Port State
Configured Administra-
tive Port State
Logged In
Port Connection Status
Reason for Status
Administrative Port
Speed
Operational Port Speed
Port Speed Supported
Symbolic Name
Port WWN
POST Status
POST Fault Code
59266-01 B
Table 6-2. Port Information Data Window—Summary
Fields
Port Fibre Channel address
Administrative port type (G, GL, F, FL, TR, or Donor). This
value is persistent; it is maintained during a switch reset. Dur-
ing port auto-configuration, it is used to determine which oper-
ational port states are allowed.
Port type that is currently active. This value is set during port
auto-configuration based on the administrative port type.
Port state (Online, Offline, Diagnostics, or Down) that has
been set by the user. This state may be different from the con-
figured administrative state if the user has not saved it in the
switch configuration. Use this state to try to set the port opera-
tional state. This value is not persistent and is lost after a
switch reset.
Port state that is currently active. This value may be different
from the administrative port state; for example, due to the
presence of an error condition.
Port state (Online, Offline, Diagnostics, or Down) that is saved
in the switch configuration, either by the user or at the factory.
This value is persistent; it is maintained during a switch reset,
and is used after a reset to set the port operational state.
Indicates whether the device connected to the port is logged
in or not
E_Port connection status. Status can be None, Connecting,
Connected or Isolated.
Reason why E_Port is isolated
Port speed requested by the user
Speed actually being used by the port
Speeds supported by the port (1Gbps, 2Gbps, 4Gbps, 8Gbps,
10Gbps and 20Gbps)
User-defined name for a port
Port World Wide Name
Status from the most recent Power On Self Test
Fault code from the most recent Power On Self Test
6–Managing Ports
Viewing Port Information
Description
6-3