Qlogic 5800V Series User Manual page 136

5–Managing Switches
Viewing Switch Information
SSH Enabled
SSL Enabled
CIM Enabled
FTP Enabled
Management Server
Enabled
SNMP Enabled
Call Home Enabled
Interop Mode
Legacy Address For-
mat
Merge Auto Save
Default Zone
Discard Inactive
Implicit Hard Zoning
Security Auto Save
Security Fabric Binding
Enabled
5-12
Table 5-1. Switch Data Window Fields (Continued)
Field
Secure Shell status. If Enabled, an encrypted data path is pro-
vided for command line interface sessions.
Secure Sockets Layer status. If enabled, encryption for switch
management web applet and CIM sessions is provided.
Common Interface Model status. The CIM agent is based on
the Storage Networking Industry Association (SNIA) Storage
Management Initiative Specification (SMI-S) that is the stan-
dard for SAN management in a heterogeneous environment.
File Transfer Protocol status Enabled or Disabled
Management server status Enabled or Disabled
SNMP status, Enabled or Disabled
Call Home status. If enabled and configured, switches can
send alerts to pagers and email. Users can configure the type
of events and where the alerts are sent.
Standard
None
If enabled, any zoning updates from the fabric are saved in
permanent (non-volatile) memory as well as temporary mem-
ory. if disabled, any zoning updates from the fabric are saved
only in temporary memory and are lost after a switch reset.
Enables or disables communication between ports and
devices not defined in the active zone set, or when there is no
active zone set
Automatically removes the previously active zone set when a
zone set is activated on a switch
Introduces hardware enforcement of zoning regardless of
type. All zones and all supported zone member types have
hardware enforcement.
Enable to automatically save security settings to permanent
memory on the switch
If Enabled, the expected domain ID of a switch is required
before the switch can be attached to the fabric.
Description
Zones/Security Group
59266-01 B