Setting Quicktools Preferences - Qlogic SANbox 5802V User Manual

A

Setting QuickTools Preferences

Using the preferences settings, you can:
Change the location of the working directory for user and event files. A
changed working directory is applicable only to the dialogs which are
opened for the first time after changing the directory or restarting the
application.
Change the location of the browser used to view the online help. The
Browser Location field is not supported/displayed for Mac OS X.
Select a Display Dialog When Making Non-secure Connections option. If
enabled, the Non-secure Connections Check dialog is displayed when you
attempt to open a non-secure fabric. You then have the option of opening a
non-secure fabric. If disabled (default), you cannot open a fabric with a
non-secure connection.
Enable (default) or disable the Event Browser. Refer to
page
(Figure
If the Event Browser is disabled when QuickTools is started and later
enabled, only those events from the time the Event Browser was enabled
and forward will be displayed.
Choose a Preferred Initial Port View option (shown in the faceplate display).
Options include port type (default), port speed, port operational state, and
port transceiver media. Regardless of the port view you choose, you can
change the port view in the faceplate display by opening the View menu and
selecting a different port view option. Refer to the corresponding subsection
for more information:
59264-01 A
3-4. If the Event Browser is enabled using the Preferences dialog
2-5) the next time QuickTools is started, all events will be displayed.
"Port Types" on page 5-14
"Port Operational States" on page 5-12
"Port Speeds" on page 5-15
"Port Transceiver Media Status" on page 5-16
2 – Using QuickTools
Setting QuickTools Preferences
"Event Browser" on
2-9