Edit Peer Dialog Box - Qlogic 5800V Series User Manual

5–Managing Switches
Configuring the Network
Copying a Peer Configuration
To copy a peer configuration to the workstation clipboard:
NOTE: Copy/pasting a current peer configuration is a convenient way to
add/configure a new peer.
1. On the Switch menu, click Network, and then click IPsecIKE Properties to
view the IKE Configuration dialog box
2. On the IKE Peer Database side, click the peer in the list to be copied.
3. Click Copy.
4. Click OK to save the changes and exit the IKE Configuration dialog box, or
click Cancel to exit without saving any changes.
Pasting a Peer Configuration
To paste a copied peer configuration from the workstation clipboard:
1. On the Switch menu, click Network, and then click IPsecIKE Properties to
view the IKE Configuration dialog box
2. On the IKE Peer Database side, click Paste.
5-44
Figure 5-21. Edit Peer Dialog Box
(Figure 5-19).
(Figure 5-19).
59266-01 B