Port Statistics Data Window; Port Information Data Window - Qlogic SANbox 1400 Series User Manual

A
Inactivity Timeout
GUI Mgmt Enabled
Telnet Enabled
SSH Enabled
CIM Enabled
FTP Enabled
Management Server
Enabled
4.2.3

Port Statistics Data Window

The Port Statistics data window displays port performance data for the selected
ports. To open the Port Statistics data window, click the Port Stats tab below the
data window in the faceplate display. Refer to
Port Statistics data window entries.
The Statistics pull-down menu is available on the Port Statistics data window, and
provides different ways to view detailed port information. Click the down arrow to
open the pull-down menu. Open the pull-down menu and select Absolute to view
the total count of statistics since the last switch reset. Select Rate to view the
number of statistics counted per second over the polling period. Select Baseline
to view the total count of statistics since the last time the baseline was set. Click
the Clear Baseline button to set the current baseline.
4.2.4

Port Information Data Window

The Port Information data window displays port detail information for the selected
ports. To open the Port Statistics data window, click the Port Info tab below the
data window in the faceplate display. Refer to
Port Information data window entries.
59226-00 B
Table 4-2. Switch Data Window Entries (Continued)
Entry
Number of minutes the switch waits before terminating an
idle command line interface session. Zero (0) disables the
time out threshold.
SANsurfer Switch Manager service status
Telnet service status
Secure Shell service status
Common Information Module service status
File Transfer Protocol service status
Management Server service status
4 – Managing Switches
Displaying Switch Information
Description
Table 5-6 for a description of the
Table 5-6 for a description of the
4-11