Alpine 3804 Switch - Extreme Networks e” series Hardware Installation Manual

Alpine 3800 Series Switch Models
Figure 76: Rear panel of the Alpine 3808 switch
The rear panel of the Alpine 3808 switch provides:
• Chassis grounding points
• System label, which includes:
— Chassis serial number
— Ethernet MAC address of the switch
— Symbols of safety certification

Alpine 3804 Switch

The Alpine 3804 switch consists of the following components:
• One 5-slot chassis, 6 U high, with backplane
• Four I/O module slots, labeled slots 1 through 4
• One SMMi slot
• One or two power supplies, accessed from the rear of the unit
• One hot-swappable fan tray containing three fan units, accessible from the front of the switch
• One electrostatic discharge (ESD) wrist strap connector
144
Label
Grounding
points
38_rear8-b
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide