Gm-4Ti Module - Extreme Networks e” series Hardware Installation Manual

Configuring I/O Modules

GM-4Ti Module

Figure 101 shows the GM-4Ti module.
Figure 101: GM-4Ti module
Module status Port speed LEDs 100/1000 Mbps ports
LED
1 2 3 4
Port status LEDs
38_GM4T
The GM-4Ti module has four Gigabit Ethernet ports. All Gigabit Ethernet ports on this module use
standard RJ-45 connectors and autonegotiate for 100BASE-TX or 1000BASE-T.
The default configuration of the GM-4Ti module is as follows. All ports:
• Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (protocol type, VLANid, and so forth).
• Operate in autonegotiation mode.
LEDs
The GM-4Ti module has the following LEDs:
• Module status
• Port status
• Port speed
For information about the LEDs and their activity on the GM-4Ti module, see "I/O Module LEDs" on
page 202.
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 183