Extreme Networks e” series Hardware Installation Manual page 62

Summit Switch Models
Figure 18: Summit 200-24fx and Summit 200-24fx-TAA switch rear view
Power socket
ES20024fx_001
Figure 19: Summit 200-48 switch front view
Console
10/100 Mbps ports Mini-GBIC ports
port
1000-baseT ports
LC48001
Figure 20: Summit 200-48 switch rear view
Power socket
LC48002
All the ports on the Summit 200 series switch have associated port activity LEDs. In addition, three
LEDs indicate status for the switch, fans, and power supply. The Summit 200-24 switches also have an
LED to indicate the unit ID when the switch is connected in a stacked configuration.
The rear of the Summit 200 series switch provides the AC power connection and air circulation vents.
A system label that lists the serial number and the unique Ethernet MAC address assigned to this
device is on the back of the Summit 200-24 and Summit 200-48 switches and on the side of the Summit
200-24fx and Summit 200-24fx-TAA switches. Use the serial number for fault reporting.
The Summit 200 switch automatically adjusts to the supply voltage. The power supply operates down
to 90 V.
NOTE
The Summit 200 switch certification and safety label is located on the bottom of the switch.
62 Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide