Extreme Networks e” series Hardware Installation Manual page 158

Alpine 3800 Series Chassis Installation
3 To reduce weight and prevent possible equipment damage, use a # 1 Phillips screwdriver to remove
the following components:
• Power supply, SMMi, and I/O modules from the Alpine 3808 and Alpine 3804
• I/O modules from the Alpine 3802
For information about removing power supplies, see Chapter 8.
For information about removing the SMMi, see Chapter 9.
For information about removing I/O modules, see Chapter 10.
4 Unscrew the chassis from the rack.
5 Have a minimum of two people gently remove the chassis from the rack and place it on a secure, flat
surface with the front of the chassis facing you.
6 Unscrew the helper bracket and remove it from the rack.
158 Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide