Cover Sensors - EUROCOM Notebook User Manual

Introduction
1
Lid Button
It is recommended that
you set the lid (left
LCD cover sensor)
power button to "Do
nothing".
This will prevent acci-
dentally triggering a
power saving mode
when you rotate the
LCD swivel screen.
Table 1 - 1
Cover Sensor
Functions
1 - 10 Top View with LCD Open

Cover Sensors

These switches act as sensors to tell when the LCD Swivel Panel is closed, in
Notebook Mode, or in Tablet Mode.
Mode Left LCD Cover Sensor
Press the left LCD cover sensor to
Notebook
trigger the default power saving state
Mode
("When I close the lid of my portable
(LCD Open)
computer").
Notebook Close the LCD to automatically trigger
Mode the default power saving state ("When I
(LCD Closed) close the lid of my portable computer").
Tablet Mode
See Lid in Figure 3 - 14 on page 3 - 23
saving state. See the sidebar for the power scheme setting recommendation.
Right LCD Cover Sensor
Press and hold the right LCD cover
sensor, and simultaneously press/tap
the "Q" key to trigger the functions as
per "Q Key Functions" on page 2 -
If the LCD is fully locked down, the right
LCD cover sensor will be depressed
automatically. Press/tap the "Q" key to
N/A
trigger the functions as per
Functions" on page 2 - 16
for information on setting the power
16.
N/A
"Q Key
.