Removing The Battery; Battery Removal Process - EUROCOM Notebook User Manual

Removing the Battery

If you are confident in undertaking upgrade procedures yourself, for safety
reasons it is best to remove the battery.

Battery Removal Process

1. Turn the computer off, and turn it over.
2. Locate the battery bay as highlighted in
3. Slide the battery lock in the direction of the arrow
4. Slide the battery lock in the direction of the arrow
5. Slide the battery in the direction of the arrow
computer's battery bay.
Figure 6 - 1
1
2
, then lift it up and out of the
3
1
3
2
Upgrading The Computer
.
.
, and hold it in place.
Removing the Battery 6 - 3
Warranty Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
Figure 6 - 1
Battery Removal
6