Drivers & Utilities
Windows XP
This section covers driver and utility installation in-
structions for the Windows XP OS.
4
Windows XP Service Pack 1/1a
Make sure you install Windows XP Service Pack 1/
1a (or a Windows XP version which includes Service
Pack 1/1a) before installing any drivers. Service
Packs 1 and 1a include support for USB 2.0.
If you have upgraded the system by installing Ser-
vice Pack 1/1a (i.e. your Windows XP version does
not include Service Pack 1/1a) then follow these in-
structions:
1.Go to Device Manager (see step 1 of the Touch
Panel driver installation instructions on page
20) and click "+" next to Other devices (if its sub-
items are not shown).
2.Right-click Universal Serial Bus (USB) Control-
ler and select Uninstall > OK.
3.Restart the computer and it will find the USB 2.0
controller.
4 - 14 Windows XP
Chipset (WinXP)
1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\inf_update\infinst_autol.exe and
click OK.
3. Click Next > Yes > Next.
4. Click Finish to restart the computer.
Audio (WinXP)
1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\Audio\Setup.exe and click OK.
3. Click Next.
4. Click Finish to restart the computer.
5. You can click the AC97 Audio Configuration
icon
in the taskbar for configuration options.
4 -
Need help?
Do you have a question about the Notebook and is the answer not in the manual?