Advanced Menu; Installed O/S (Advanced Menu) - EUROCOM Notebook User Manual

BIOS Utilities
Figure 5 - 3

Advanced Menu

5
SATA Mode & eSata
Port
The eSATA port only
supports hot-swapping if
you have selected AHCI
mode in SATA Mode
Selection.
If you have selected IDE
mode, then hot-swap-
ping devices connected
to the eSATA port is not
supported.
5 - 8 Advanced Menu
Advanced Menu
Main Advanced Advanced
Installed O/S:
SATA Mode Selection:
Legacy USB Support:
Boot-time Diagnostic Screen:
Legacy OS Boot:
Reset Configuration Data:
Battery Low Alarm Beep:
Only available if Windows Vista
is selected as the O/S.
F1 Help Select Item
Esc Exit Select Menu

Installed O/S (Advanced Menu)

This setting tells the computer what kind of operating system you're using. Make
sure you choose the correct setting for your O/S in order to prevent system problems.
Note: If you select the Vista O/S then the SATA Mode Selection menu will become
available. If you are installing the Windows XP O/S make sure you have set the ap-
propriate operating system here in order to prevent system problems.
Phoenix SecureCore(tm) Setup Utility
Security Boot
[Vista]
[AHCI]
[Enabled]
[Disabled]
[Disabled]
[No]
[Disabled]
-/+ Change Values
Enter Select
Exit
Item Specific Help
Select the operating
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
F9 Setup Defaults
Sub-Menu F10 Save and Exit