Reset Configuration Data: (Advanced Menu); Legacy Usb Support: (Advanced Menu); Boot-Time Diagnostic Screen: (Advanced Menu); Power On Boot Beep: (Advanced Menu) - EUROCOM Notebook User Manual

BIOS Utilities

Reset Configuration Data: (Advanced Menu)

This item is set to No as default. You can change the setting to Yes if you have in-
stalled a new add-on which has reconfigured the system, resulting in such a serious
system conflict that the operating system is unable to boot.

Legacy USB Support: (Advanced Menu)

Use this menu item to enable/disable the support for Legacy Universal Serial Bus.
5

Boot-time Diagnostic Screen: (Advanced Menu)

Use this menu item to enable/disable the Boot-time Diagnostic Screen (see "The
Power-On Self Test (POST)" on page 5 - 2).

Power on Boot Beep: (Advanced Menu)

Use this menu item to enable/disable the beep as the computer starts up.

Battery Low Alarm Beep: (Advanced Menu)

Use this menu item to enable/disable the battery low alarm beep.

Total Graphics Memory: (Advanced Menu)

Use this menu item to set the amount of system memory to be allocated for use by
the internal graphics device. The default memory size allocated is 64MB, and this
may be adjusted by pressing the spacebar if required.
5 - 8 Advanced Menu