FARGO electronics L000286 User Manual page 208

RESTRICTED USE ONLY
Glossary of Terms (continued)
Term
Queue
RAM (Random
Access Memory)
Rasterize
Reboot
Registration
Resident Font
Resolution
RGB
(Red/Green/Blue)
Ribbon
Ribbon cable
RMA number (Return
Merchandise
Authorization
number)
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
Definition
A sequence of files or sets of data, awaiting transmission or
processing.
A storage device for digital information to be held temporarily, to
facilitate processing.
The process of converting the elements of a graphic into a bitmap
to be printed.
Cycling the power to the Printer so that it resets and reinitializes.
The quality of the alignment of the separate primary-color images:
YMCK.
A set of characters loaded into the Printer memory that can be
programmed to print those characters on the card without
rasterizing the image.
The number of individual pixels in a graphic, taken over a given
length, used to indicate the sharpness of the picture and the level
of detail. The number of elements in the Printhead determines
Fargo Printer resolution. See CardJet Engineering Drawing No.
D400147 in the appendix.
The three primary colors of the luminance or additive, model.
Combinations of these three colors can produce practically all the
colors of the spectrum that humans can detect. Computer
monitors operate on an RGB model.
The dye impregnated film that is used for color printing.
Parallel wires held flat in a row by plastic insulation.
A number, acquired from Fargo Support, which authorizes the
return of merchandise for repair or credit.
Fargo Electronics, Inc.
Continued on the next page
8-11