FARGO electronics L000286 User Manual page 101

RESTRICTED USE ONLY
Selecting the Image Color tab _________________________________________________________ 4-43
Selecting the Color Quality under the Image Color tab ___________________________________ 4-44
Selecting the Color Quality ________________________________________________________ 4-45
Selecting the Print in Grayscale checkbox _____________________________________________ 4-46
Selecting the Print in Grayscale checkbox _____________________________________________ 4-46
Selecting the Infrared Bar Codes checkbox ____________________________________________ 4-46
Selecting the Default button _______________________________________________________ 4-47
Selecting the Image Position tab _______________________________________________________ 4-48
Using the Vertical and Horizontal Adjustment arrows ____________________________________ 4-49
Using the Vertical and Horizontal Adjustment arrows _________________________________ 4-50
Selecting the Magnetic Encoding tab (both 410/C7 models) _________________________________ 4-51
Using the Verification option under Magnetic Encoding __________________________________ 4-52
Using the Magnetic Track Selection option under Magnetic Encoding _______________________ 4-53
Using the Magnetic Track Options under Magnetic Encoding______________________________ 4-54
Using the Bit Density radio buttons under Magnetic Encoding _____________________________ 4-55
Using the Character Size radio buttons under Magnetic Encoding __________________________ 4-55
Using the ASCII Offset under Magnetic Encoding ______________________________________ 4-56
Using the LRC Generation radio buttons under Magnetic Encoding _________________________ 4-57
Using the Character Parity radio buttons under Magnetic Encoding _________________________ 4-57
Reviewing the Shift Data Left under Magnetic Encoding _________________________________ 4-58
Using the Default button under Magnetic Encoding _____________________________________ 4-59
Reviewing the ISO Track Locations__________________________________________________ 4-60
Reviewing the Sample String _______________________________________________________ 4-61
Reviewing the ASCII Code and Character Table ________________________________________ 4-62
Sending the Track Information ______________________________________________________ 4-63
Selecting the Print Supplies tab________________________________________________________ 4-64
Using the Print Supplies tab (continued) ____________________________________________ 4-65
Using the Reorder Numbers indicators________________________________________________ 4-66
Accessing the Color Map Selection Dialog ____________________________________________ 4-67
Selecting the Color Map (Card Media Type) ___________________________________________ 4-68
Selecting the Clean Ink Cartridge Nozzles button _______________________________________ 4-69
Cleaning the Ink Cartridge Nozzles (continued) ______________________________________ 4-70
Cleaning the Ink Cartridge Nozzles (continued) ______________________________________ 4-71
Cleaning the Ink Cartridge Nozzles (continued) ______________________________________ 4-72
Cleaning the Ink Cartridge Nozzles (continued) ______________________________________ 4-73
Selecting the Test Printer button_____________________________________________________ 4-74
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
Fargo Electronics, Inc.
4-2