FARGO electronics L000286 User Manual page 48

RESTRICTED USE ONLY
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Card Encoding The Encoding module is self-contained and easily field-upgradeable by
an Operator (or a Service Technician).


Card Error The Firmware traps and reports the error condition via the Card LED
Recovery (See
and a corresponding message at the Driver Operator Interfaceafter
Card LED)
which the print operation is halted.
The Printer will restart the operation and will continue printing cards
after the Operator opens the Printer Top Cover, fixes and removes the
jammed card, closes the Printer Top Cover and presses the Card
button.
Troubleshooting Instructions. See Section 2):


Color Ink Prior to the first card printing, the Ink LED begins to blink, indicating an
Cartridge out of error. The Printer correctly detects and reports improperly loaded Card
ink Cartridges. See the
The PC screen pop-ups displays this message: The color Ink
Cartridge in the Printer is out of ink.
Troubleshooting Instructions. See Section 2):

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
Encode Only option (not provided): The Printer will not provide
an Encode Only option that allows for encoding without printing.
Strictly used with Fargo CardJet products: The Encoder is
designed so it can only be used with Fargo CardJet products.
Open the Printer Top Cover, fix it and remove the jammed card.
Close the Printer Top Cover to restart the Printer operation and
continue printing cards.
Interpreting the LED Lights
Replace the Cartridge and close the cover to print.
Fargo Electronics, Inc.
procedure.
Continued on the next page
2-39