FARGO electronics L000286 User Manual page 81

RESTRICTED USE ONLY
Interpreting LED Lights (continued)
Power Card
LED
LED
On solid Off
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
Ink LED Cause / Solution
Flashing Indicates you need to check the status of the Ink
Cartridges.
This LED will flash when:

The Top Cover is open. When open, the Ink
Cartridge will move to the install position.
Regardless of the Ink Cartridge condition, the
Cartridge will always move to this position. When
the Top Cover is closed, the Cartridge will return to
its home position. If a print job has been received,
printing will resume when the Top Cover is closed.
If the Top Cover is left open, the Cartridge will
return to its home position after a few minutes of
the Printer sitting idle.

One or both of the Ink Cartridges is improperly
installed or missing. Open the Top Cover and
install or reinstall the Ink Cartridges.

One or both of the Ink Cartridges is out of ink.
Replace the empty Ink Cartridge.

A non Fargo-certified Cartridge is installed. Use
only Fargo Certified Supplies.

It flashes when the ink runs out early.
Troubleshooting Instructions:
1. In any of these situations, correct the condition and
close the Top Cover to continue printing.
Fargo Electronics, Inc.
3-7