FARGO electronics L000286 User Manual page 195

RESTRICTED USE ONLY
Cleaning the interior Card Feed Rollers (cont.)
Step Procedure
8 When the cleaning card is feed to the Card Image Station, turn the Drive Gear the
opposite direction to feed the cleaning card back into the card Hopper.
9 Remove and dispose of the cleaning card.
10 Close the Covers.
11 Replace the Card Cartridge.
12 Power up the Printer.
13 Run the test card and check the card feed.
This procedure is completed.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
Fargo Electronics, Inc.
5-22