FARGO electronics L000286 User Manual page 72

RESTRICTED USE ONLY
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Printer Start-up
The device initialization and Firmware downloading occurwhen the
Printer start-up is initiated.
Ink Carriage The device on a Printer that produces the image on the media.
mechanism
Programmed The Printer correctly detects and reports a color Ink Cartridge
color Ink programmed with a Professional product ID via Ink LED and on-screen
Cartridge with a message. See Ink LED and Error Messages in Section 2.
Professional
product
Programmed The Printer correctly detects and reports a black Ink Cartridge
black Ink programmed with a Professional product ID via Ink LED and on-screen
Cartridge with a message. See Ink LED and Error Messages in Section 2.
Professional
product
Raising Cover You can raise the cover during the printing process and it will have no
while printing effect on the printing process and the card print quality.
Replace empty The Printer correctly detects and reports an empty color Ink Cartridge
Ink Cartridges
via LED and on-screen messagewhen the empty Cartridges are in
the Printer where the color Cartridge is empty.
Troubleshooting Instructions:


CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
Correctly install the non-empty black and color Ink Cartridges in the
CardJet Printer.
Observe and record the Printer and PC screen responses when the
card is printed. The Ink LED should return to normal. The Printer
should resume printing the print job.
Fargo Electronics, Inc.
Continued on the next page
2-63