Configure Authenticator - D-Link DGS-3212SR User Manual

Configure Authenticator

To display the current 802.1X Authenticator Settings on the switch, open the Security folder, and then the Port
Access Entity folder and finally click on the Configure Authenticator link. This will open the 802.1X
Authenticator Settings page, as shown below.
To configure the 802.1X Authenticator settings for a given port, click on the blue port number under the Port
heading. This will open the 802.1X Authenticator Settings page, as shown below.
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
State Machine Name
Port Timers state machine
Authenticator PAE state machine
The Authenticator Key Transmit state machine
Reauthentication Timer state machine
Backend Authentication state machine
Controlled Directions state machine
The Key Receive state machine
Conformance to IEEE 802.1X Standards
Figure 17-4. 802.1X Authenticator Settings
86