Deleting Stored Images - Sharp ViewCam VL-NZ150U Operation Manual

Deleting AJ| Stored images
You can delete all stored images on a card in
one operation.
Notes:
o Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
o If you want to keep some images on the card,
first delete-protect them (see page 60), and then
perform the procedure below.
1 In CARD-VCR mode, press the MENU
button until the menu screen appears.
2 Press _7 or /,, on the operation button
to select _, then press the SET button.
3 Press V or /,, to select"DELETE", then
press the SET button.
SET
4 Press _7 or z1_to select"ALL IMAGES",
then press the SET button.
* The DELETE ALL indicator appears.
4,
5
_DELETE ALL="""""=I 100-0001
NORMAL PAGE1 /2
DELETE ALL indicator
Press V or /,, to select"YES", then
press the SET button to delete all the
images.
* To cancel deletion, press ,,/ or ..A, t o
select "NO". then press the SET button.
6 Press the MENU button to finish the
setting
Notes:
o The protected images cannot be deleted.
Cancel the protection setting to delete the image
(see page 60).
o If a print order is assigned to delete-protected
images and you perform the procedure above,
the print order will cancel (the protection setting
will not cancel).
o It may take several seconds to delete all images
from the card.
Caution:
o Do not turn the power off while deleting images.
!i!i!i!i!_ii!_!i_ijji
iiiiiiiiiiiiiiii_' ........
62