Sharp ViewCam VL-NZ150U Operation Manual page 30

Preparation
iiiiiiiiiiiiiiii_iiiiiiiiiiii
Available modes:
TAPE-CAMERA, CARD-CAMERA
This camcorder allows you to choose English,
French or Spanish as the on-screen display
language.
Power switch
SET button _
MENU button
Operation button
Setting
When using the camcorder for the first time,
select your on-screen display language by
following the steps below.
1 Hold down the Lock button and set the
Power switch to CAMERA.
• The language selection screen appears.
2 Press _/ or A on the operation button
to select the desired language, then
press the SET button.
@
Changing
1 In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2
3
Press _y or z1_, on the operation button
to select ETC, then press the SET button.
Press ',/ or A to select "LANGUAGE"
("LANGUE" or "IDIOMA"), then press the
SET button.
- The language selection screen appears.
4
language selected.
Press _/ or _ to select the desired
language, then press the SET button.
,, The menu screen displays in the
15
AUTO
5 Press the MENU button to turn off the
menu screen.
Note:
" The operation procedures in the following
sections are based on using the English on-
screen displays.