Sharp ViewCam VL-NZ150U Operation Manual page 48

Useful Features
Camera Recording
Available mode:
TAPE-CAMERA
You can record continuous still images of
subjects.
1 Set the camcorder to TAPE-CAMERA
mode.
In Recording Standby mode, sT_
press the STILL button fully.
17
- A still image of the subject is
displayed.
Press the REC START/
STOP button.
- The still image of the
subject will be recorded.
Press the REC START/STOP button.
To cancel the still image
Press tile STILL button fully.
Notes:
o Still Recording can also be used during
recording by pressing the STILL button fully.
o The picture quality in Still Recording function will
be slightly lower than normal pictures.
Attach the supplied tripod adapter when using
a tripod with the camcorder.
Align the tripod adapter with the tripod
adapter socket on the bottom of the
camcorder, then rotate as shown below.
Tripod adapter socket
Tn od socket t_,,-_ I
2 Attach tripod to tripod socket.
Note:
o You cannot use the supplied tripod adapter, if
the alignment pin is not retractable.
33