Sharp ViewCam VL-NZ150U Operation Manual page 6

Quick Operation Guide
Please consult this operation manual
further for details on these and other
functions of your camcorder.
Power switch
Make sure that the Power
switch is set to OFF.
Align the m mark on the side of the
battery pack with the B mark on the
camcorder (_), and slide the battery
pack in the direction of the arrow
completely until it locks into place (2:).
1 Attach the battery pack on the
camcorder, and make sure that the
Power switch is set to OFR
2 Plug the AC adapter into a power outlet
(_), then insert the DC plug into the DC
input jack (21).
,, The charge indicator lights up.
DC input jack
T° p°vver °u_rt Charge indicator _ [_-//_i _
_, The charge indicator turns off when the
battery is charged.
3 Remove the DC plug from the DC input
jack, then remove the AC adapter from
the power outlet.