Sharp ViewCam VL-NZ150U Operation Manual page 67

Available mode:
TAPE-VDR
You can select any of the following audio
playback modes.
3
4
Audio 1 +2
6' 12-bit recording in stereo (Audio 1 and
Audio 2 channels)
6' 16-bk recording in stereo (left and right
channeb)
Audio 1 5
6' 12-bk recording in stereo (Audio 1 channel
only)
,, 16-bk recording in mono (left channel only)
Audio 2
6' 12-bk recording in stereo (Audio 2 channel
only) 6
6' 16-bit recording in mono (right channel
only)
1 Play back a Mini DV cassette with
dubbed audio.
2 Press the MENU button until the menu
screen appears.
Press V or A on the operation button
to select _, then press the SET button.
Press V or £ to select"AUDIO", then
press the SET button.
SET
Press V or /,, to select the desired
audio playback mode, then press the
SET button.
Press the MENU button to turn off the
menu screen.
- The selected audio playback mode
indbator only appears when the on-
screen indbators are turned on.
Audio playback mode indicator
Note:
o The audio playback mode indicator, "AUDIO",
displays in different coEors depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, while a green
indicates 16-bit.
iiiiiiiiiii!_ii!iillllll_
i;@ii_ililililili
iii!%_!i#!!!
iiiiii!iiiiii_iiiiiiiil
52