Sharp ViewCam VL-NZ150U Operation Manual page 31

4 Press _/ or zi_to select "JUN" (month),
then press the SET button.
Available modes:
TAPE=CAMERA, CARD=CAMERA
Example: Setting the date to June 2. 2003
(JUN. 2. 2003) and the time to 10:30 am
(10:30 AM).
Power switch
MENU button
Operation button
Note:
o Before performing the steps below, make sure
that the lithium battery has been instaNed (see
page 14).
1 Hold down the Lock button
and set the Power switch to
CAMERA.
5
6
7
8
Press _/ or A to select "2" (day), then
press the SET button.
Press _/ or A to select"2003" (year),
then press the SET button.
Press _/ or ,,Ato select "10 AM" (hour),
then press the SET button.
Press V or z1_to select"30" (minute),
then press the SET button.
• The internal clock now starts operating.
Lock button
2 Press the MENU button until the menu
screen appears.
9 Press the MENU button to turn off the
menu screen.
Note:
o If tile date and time have been set, the SETTING
1 screen (6) appears in step 2. Select
"SETTING" in the CLOCK SET screen (C_)) using
the Operation button and SET button.
3 Press the SET button.
SET
16