Sharp ViewCam VL-NZ150U Operation Manual page 43

The "D" digital zoom indicator is displayed
during digital zooming.
Available modes:
TAPE=CAMERA, CARD=CAMERA
You can select three different zoom ranges: 1
10× (optical zoom), 1040× (digital zoom) or
10 300x (digital zoom). The digital zoom
allows you to record powerful close-up pictures
with the same operation as normal zooming.
Notes:
o The digital zoom is in addition to the optical
zoom giving a combined maximum zoom range
of 1 300×.
, As the image is enlarged digitally, the picture
quality decreases when higher digital zoom
settings are used.
1 In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2
3
Press V or /,_ on the operation button
to select ¢Pl, then press the SET button.
Press V or A to select"DGTL ZOOM"
then press the SET button.
WI._I-IT D-ZOOM 25
Dgta zoom nd cator
To use optical zoom only
Select "OFF" in step 4 above.
ii_i!_i_!_!!_
iiiii_iiiiiii_!_iiii!!iiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiii,_,_,
Press V or A to select "40" or"300",
then press the SET button.
Press the MENU button to turn off the
menu screen.
28