Sharp ViewCam VL-NZ150U Operation Manual page 53

Available modes:
TAPE=CAMERA, TAPE-VCR
Use the remote control to operate the
camcorder from a distance, such as when you
want to record yourself in a scene, or when the
camcorder is connected to a TV for use as a
VCR.
installing the Batteries
1 Open the battery compartment cover.
Insert the two supplied AA (R6 or UM/
SUM-3) batteries with the battery poles
positioned as indicated.
1 2
Place the cover.
4:
ActJvati.g
1 In TAPE-VCR (or CARD-VCR) mode,
press the MENU button until the menu
screen appears.
2 Press _7or z1_, on the operation button
to select ETC, t hen press the SET button.
3 Press V or A to select"REMOTE",
then press the SET button.
4 Press V or _1_, to select"ON", then press
the SET button.
5 Press the MENU button to turn off the
menu screen.
Operating
Aim tile remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.
15°
0
REW button
f REC START/STOP utton
_.1_ ZOOM btt (W/T)
! _ _ u ons
FF button
I L LFIsL°wbutton
LSTOP button 'J°Lu_4E ÷
VOLUME /÷ buttons
PAUSE/STILL button
Notes:
o Do not use old and new batteries together or
batteries of different brands together.
o Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as this
may prevent the remote control from operating
properly.
,, Be sure that there are no obstacles between the
remote control and the remote sensor.
i{ili!iii!i!!_!ii
]]i_iiiiiii_!_iiii!!iiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiii,_,_,
38