Sharp ViewCam VL-NZ150U Operation Manual page 76

Digital StilJ Camera Features
PJayback
iiiiiiiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!ii
iiii!?!Eiiiiiiii;ilililililiiii
iiiii!iii_iiiiiiiiiiiiiiiiiiliiii
iiiiiii!!_iiiiiiiiiiiiiiiiii!
Available mode:
CARD=VCR
Deleting One Stored image
You can delete unwanted images to free up
memory of a card for new images.
Note:
e Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
1 In CARD-VCR mode, press the MENU
button until the menu screen appears.
2 Press _7 or z1_, on the operation button
to select _, then press the SET button.
3
Press _7 or z1_, to select"DELETE", then
press the SET button.
4 Press V or /,, to select"ONE IMAGE",
then press the SET button.
* The DELETE indicator appears.
DELETE indicator
5 Press <, >, V or Z_ to select the
image to be deleted.
_ DELETE
NORMAL
100-0003
PAGE1/2
6
7
Press the SET button to set the image.
* To cancel deletion, press V or ;,_ to
select "NO", then press the SET button.
Press V or /,, to select"YES", then
press the SET button to delete the
image.
100-0003
PAGE1/2
4,
DELETE 100-0004
NORMAL PAGE1/2
* If you want to delete another image,
repeat steps 5 to 7.
8 Press the MENU button to finish the
setting.
Note:
" The protected images cannot be deleted.
Cancel the protection setting to delete the image
(see page 60).
Caution:
" Do not turn the power off while deleting an
image.
61