Sharp ViewCam VL-NZ150U Operation Manual page 22

Operation References
If a warning indicator appears on the screen, follow the specified instructions.
I N S E R T ..r_\_,-_ There is no video cassette in the camcorder.
A CASSETTE.
!,_-V-\_! Insert a cassette (see page 12).
EJ ECT THE EJECT THE The video cassette is defective and should be
CASSETTE. CASSETTE.
removed (see page 12).
CASSETTE NOT ........ ' .... The erasure protect tab on the video cassette
PROTECT. TAB
has been slid to the record-protect position,
RECOROABLE ........... , preventing recording (see page 72).
THE TAPE
TAI_E ' I:NI)
Thetape isaboutto end. Prepare a new
ENOS SOON ........ cassette (see page 12).
CHANGE THE The tape has reached the end. Replace it with a
CASSETTE. TAPE END newcassette(seepage 12).
BAT T ERY I S "" ' " The battery is almost depleted. Replace it with a
TOO LOW. _,\q -
fully charged battery pack (see page 9).
Dew has formed inside the camcorder. Wait a
few hours for the dew to dry away (see
DEW b FW page76).
" ' " About 10 seconds after this warning appears,
the camcorder automatically turns off.
, , The video heads are dogged and should be
0 "Q cleaned (see page 77).
The fluorescent lamp behind the LCD monitor is
LAMP LAMP close to the end of its service life. Call your local
authorized Sharp dealer to have it replaced.
The battery is aJmost depleted when the
, _, _,, oamoorder transfers data through the USB
USB [_0_ _-I USB
I_,O_ D cable. Use the AC adapter or fullyoharged
battery pack as the power source (see pages 9-
11, 66).