Setting Up Your Vcr If You Are Using; Usingthe Remotecontrol; Using The Remote Control To Operate; The Vcr - Mitsubishi HS-U780 Owner's Manual

Video cassette recorder
Table of Contents

Advertisement

Chapter 3: Operating YourVCR
SettingUp YourVCRfor the FirstTime(cont.)
_Important:
O
Turn the RF converter
OFF by following instructions
on p. 68.
Setting upyourVCRif youareusinga TVwithout A udioandVideo
Inputs(Older TV)
If you are using
an Older TV (A TV that does not have separate
audio and video inputs),
then your VCR will need to "convert" the
VCR's picture
or menus
into a channel,
this channel
can be either
channel
3 or channel
4. The factory
has already
selected
channel
3, however,
if channel
3 is a real channel
in :your area, then you
will need to change
this to channel
4.
O
If you need to use channel
4, then before you turn
on the
VCR, turn the front panel jog dial clockwise while holding
down the ONE KEY PROGILAM button
on the front panel.
The words "Ant ch.4" will display
on the front panel display
and the VCR will send signals
on channel
4.
Turn the VCR on by pressing
the POWER
button.
The VCR will return
to its initial
setting
(charmel
3) if you turn
the jog dial counter-clockwise
while holding
dc,wn the ONE KEY
PROGRAM
button
on the front panel with t:he VCR turned
off.
The word "Ant ch3" will be displayed.
Usingthe RemoteControl
22
m
T
!!i
In this section, you'll learn how to set up and use your remote
control. This section
includes:
• Using the remote
control
to operate
the VCR, and
• Using the remote
control
to operate
the TV.
Usingthe remotecontrol to operatethe VCR
installing the batteries
Unpack
two AA size batteries.
To remove
the back cover, press the rid_;ed area gently, then
push the cover in the direction
of the an'ow and lift.
Load the batteries,
making
sure the polarities
(+) and (-) are
correct.
operating the remote control
The HS-U780
has two VCR operation mode,_: VCR-A mode and
VCR-B mode.
The HS-U780
is pre-set
to VCR-A operation
mode.
Press
the VCR button
on the remote
cor,Ltrol.This "tells" the
remote
that you want to control
the VCR.
Press the VCR-A button
on the remote
control.
Now your
remote
is ready to operate
your HS-U780.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents