Table of Contents
Advertisement
Chapter3: Operating YourVCR
SettingUp YourVCRForthe FirstTime(cont.)
Important:
0
If you tuned the TV to channel
4 in step O, press the CHAN-
NEL •
button
and the ONE KEY PROGRAM
button
on the
front panel at the same time with the VCR turned
off. The
word "Ant ch4" will display
on the front panel display
of the
VCR and the VCR will send signals
on chaanel
4. (If you
tuned the TV to channel
3, you don't need 1_o do this.)
Turn the VCR on by pressing
the POWER
button.
The VCR will return
to its initial
setting
(chanael
3) if you press
the CHANNEL
•
button
and the ONE KEY PROGRAM
button
on the front panel at the same Lime with the V_R turned
off.
Setting up your VCR if you are using a TV equippedwith Audio and
Video Inputs(ModernTV)
Turn on your TV and switch it to the correct
external
input.
(For most Mitsubishi
TVs, this means
pres_ing
the TV's
INPUT
button
until you see the words "F,xt-l" on the screen.)
Turn the VCR on by pressing
the POWER
button.
€ Usingthe RemoteControl
In this section, you'll learn how to set up and u _e your remote
control.
This section
includes:
• Using the remote
control to operate
the VCR, and
• Using the remote
control to operate
the UV.
Usingthe remotecontrol to operatethe VCR
installing the batteries
O
Unpack
two AA size batteries.
To remove the back cover, press the ridged
area gently,
then
push the cover in the direction
of the arrew
and lift.
Load the batteries,
making
sure the polarit!es
(+) and (-) are
correct.
operating the remote control
O
Press the VCR button
on the remote
control. This "tells" the
remote
that you want to control the VCR.
While within 23 feet of the VCR, point the remote
control
toward
the VCR and press ti_e buttons
you desire.
18
Advertisement
Table of Contents
