Be sure the range is leveled when installed.
the range is not level, turn the leveling legs,
located at each corner of the range, until
range is level.
Removal of Gas Appliance
Gas appliance connectors used to connect this appliance to
the gas supply are not designed for continuous movement.
Once installed,DO NOT repeatedly move this gas appliance
for cleaning or to relocate. If this appliance has to be moved
and/or removed for servicing, follow the procedure described
in the installation instructions.For information,contact
Maytag Customer Assistance at 1-800-688-9900 USA or
To prevent range from accidentally tipping, range must be
secured to the floor by sliding rear leveling leg into the anti-
Appliances which require electrical
power are equipped with a three=
plug which must be
plugged directly into a properly grounded
three-hole 120 volt electrical outlet.
Always disconnect power to appliance before servicing.
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
owner to have the outlet replaced with a
properly grounded three=hole electrical