Oven Light; Oven Window; Leveling Legs - Maytag RS-1 User Manual

Hide thumbs Also See for RS-1:
Table of Contents

Advertisement

Available languages

Available languages

CARE & CLEANING
Maintenance
OVEN DOOR
CAUTION:
Do not place excessive weight on
or stand on an open oven door.
This could cause the range to tip
over, break the door, or injure the
user.
Do not attempt to open or close
door or operate oven until door is
properly replaced.
Never place fingers between
hinge and front oven frame.
Hinge arms are spring mounted.
If accidentally hit, the hinge will
slam shut against oven frame
and could injure your fingers.
TO REMOVE:
1. When cool, open the oven door to
the first stop position (opened about
four inches).
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears hinge
arms.
TO REPLACE:
1. Grasp door
at each side.
2. Align slots in
the door with the hinge arms on the
range.
3. Slide the door down onto the hinge
arms until the door is completely
seated on the hinges. Push down
on the top corners of the door to
completely seat door on hinges.
Door should not appear crooked.
NOTE: The oven door on a new range
may feel "spongy" when it is closed.
This is normal and will decrease with
use.
15
, CONT.

OVEN LIGHT

CAUTION:
Disconnect power to range
before replacing light bulb.
Use a dry potholder to prevent
possible harm to hands when
replacing bulb.
Be sure bulb is cool before
touching bulb.
Do not touch hot bulb with a
damp cloth as this may cause
the bulb to break.
BULB COVER
WIRE
RETAINER
TO REPLACE OVEN LIGHT BULB:
1. When oven is cool, hold bulb cover
in place, then slide wire retainer off
cover. NOTE: Bulb cover will fall
if not held in place while remov-
ing wire retainer.
2. Remove bulb cover and light bulb.
3. Replace with a 40-watt appliance
bulb.
4. Replace bulb cover and secure with
wire retainer.
5. Reconnect power to range. Reset
clock.

OVEN WINDOW

TO PROTECT THE OVEN
DOOR WINDOW:
1. Do not use abrasive cleaning
agents such as steel wool scouring
pads or powdered cleansers as
they may scratch the glass.
2. Do not hit the glass with pots, pans,
furniture, toys or other objects.
3. Do not close the door until the oven
racks are in place.
Scratching, hitting, jarring or stressing
the glass may weaken its structure
causing an increased risk of breakage
at a later date.

LEVELING LEGS

CAUTION:
Be sure the anti-tip bracket se-
cures one of the rear leveling
legs to the floor to prevent the
range from accidentally tipping.
The range should be leveled when in-
stalled. If the range is not level, turn
the plastic leveling legs, located at
each corner of the range,
until range is level.
LEVELING LEG
LEVELING LEG
ANTI-TIP BRACKET
ANTI-TIP BRACKET

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgr5720bdqMgr5720bdw

Table of Contents