Table of Contents
Advertisement
2-30
Setup and Operation
The CMOS values have been corrupted or modified incorrectly, perhaps by an application pro-
gram that changes data stored in CMOS.
Press
to resume the boot or
F1
the menus. Other changes can be made before saving the values to NVRAM.
Load Previous Values
During a Setup session, if a mistake has been made and has not yet been saved to NVRAM, the
previously saved NVRAM values can be restored.
Selecting Load Previous Values on the Exit menu updates all the selections and displays this mes-
sage:
Save Changes
Save Changes saves all the selections without exiting Setup. Other menus selections can be re-
viewed or changed.
BIOS UPDATE UTILITY
The NEC Bulletin Board Service (BBS) provides information about system software and hard-
ware. Use the NEC BBS to obtain the latest version of the BIOS Update utility (BUU) and for
VGA video drivers.
To log onto the NEC BBS, follow these steps:
1.
From the Windows Program Manager, select Accessories and double click on
Terminal.
2.
From the Settings menu, select Communications and check that the settings match the
following BBS parameters:
n
Baud rate: 2400 bps
n
Parity: none
n
Data bits: 8
n
Stop bits: 1
to run Setup with the ROM default values already loaded into
F2
CMOS values have been loaded!
Press <space> to continue
NOTE: First time users must answer a new user
questionnaire.
- Quick Links:
- Processor
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
