Utility Menu; Language; Detect Ide; Security Menu - Intergraph TD-x20 Setup Manual

Utility Menu

Use the following utilities to change the language used in BIOS Setup, and to automatically
detect and configure any IDE drives you connect to the system. For information on setting
an IDE device to master or slave, refer to the documentation accompanying the device.

Language

The default is English.

Detect IDE

This parameter searches for IDE devices connected to the IDE controller. Any IDE drive
found is then made available for you to configure.

Security Menu

The Security Menu allows you to change the system password for both the Supervisor and
the User.

Supervisor, User

To prevent unauthorized users from accessing the AMIBIOS Setup program, you can enter a
password on both of the Supervisor and User menus. If you do not enter a password, then
the system will not prompt users for a password when they start AMIBIOS Setup. These
passwords do not affect the system logon password.
NOTE The Advanced Setup menu contains the Password Checking parameter that enables the
system to use the password you enter.
To enter a password:
1. Select the Password icon from the AMIBIOS Setup Main Menu. The Password menu
displays.
2. Type the characters (maximum of six) for the password, and then press
3. Re-type the password to confirm it and press
To disable a password:
1. Select the Password icon from the AMIBIOS Setup Main Menu.
2. Type in the current password, and press
.
ENTER
.
ENTER
35
.
ENTER