Using Amibios Setup; Setup Menu; Standard - Intergraph TD-x20 Setup Manual

Using AMIBIOS Setup

The AMIBIOS Setup menu allows you to change most of the BIOS settings. This section
describes the parameters grouped in the AMIBIOS Setup menu. Which parameters are
available depends on your system configuration and your status as Supervisor or User.

Setup Menu

Standard

The Standard Setup menu allows you to set the IDE drive parameters, set the system date
and time, and define floppy disk drive parameters.
Primary Master, Primary Slave, Secondary Master, Secondary Slave
These icons represent parameters for Integrated Device Electronic (IDE) drives. If installing
IDE hard drives, use the Detect IDE utility to automatically detect and configure the drives.
Refer to "Utility Menu" for more information.
To change the IDE drive parameters:
1. Select Primary/Secondary Master or Primary/Secondary Slave.
2. Select USER from the list of drive types.
3. Select each of the following parameters and enter the appropriate values. For more
information, refer to the documentation included with the device.
CYL
HD
WP
LZ
SEC
4. When complete, press
Date/Time
Select the Date/Time icon to display the current system date and time values.
Cylinders
Heads
Write Precompensation
Landing Zone
Sectors
or click the close box at the upper left corner of the window.
ESC
25