Unpacking The System; Placing System Components - Intergraph TD-x20 Setup Manual

2

Unpacking the System

CAUTION Carefully remove the monitor and the base unit from their packaging. Do not let the monitor
or the base unit drop onto a hard surface, or damage to internal components may result.
Remove everything from the shipping cartons, then look for the following items:
u
A monitor with video cable, power cord, and documentation (if purchased from
Intergraph Computer Systems)
u
Workstation base unit, footstands, and power cord.
u
Keyboard and mouse.
u
Operating system and system software carton.
u
Intergraph Computer Systems documentation.
u
Windows NT Workstation 4.0 or Solaris for x86 operating system software and
documentation.
u
Intergraph system software for Windows NT or Solaris for x86.
u
System software and documentation for any expansion cards or additional peripheral
devices purchased from Intergraph Computer Systems
If any of these items were not delivered, call the Customer Response Center immediately at
1-800-633-7248.
Save the packaging materials. If you need to return equipment for repair, it must be in its
original packaging for you to obtain warranty service.

Placing System Components

CAUTION Do not move the base unit without first turning off the power, or damage to internal
components may result.
Remember these guidelines when placing the system's components:
u
Move and place the monitor and base unit carefully.
u
Place the base unit in a location with good air flow. Leave at least 3 inches of clearance
around the front and back panels. If you orient a desktop base unit horizontally, leave at
least 1 inch of clearance around each side.
u
Do not expose the system to high levels of dust, smoke, or moisture.