Intergraph TD-x20 Setup Manual page 16

4
2. Connect the keyboard cable to the keyboard port on the back of the base unit. Refer to
the following figures.
3. Connect the audio cables (bundled with the keyboard cable) to the audio jacks. The
cable labeled Mic connects to the microphone jack, and the cable labeled Audio connects
to the line out jack. Refer to the following figures.
4. Connect the mouse cable to the mouse port on the back of the base unit. Refer to the
following figures.
5. Connect any external SCSI devices to the SCSI port on the back of the base unit, as
described in "Installing an External SCSI Device." Refer to the following figures.
6. Connect other cables, such as network, printer (parallel port), and modem cables
(COM1 and COM2 ports) to their ports on the back of the base unit. Refer to the
following figures.
WARNING If you do not use cables supplied by Intergraph, you must use shielded cables to
prevent excessive electromagnetic interference (EMI). Intergraph cables are designed
to reduce the amount of EMI produced by the system.
SCSI
AC Voltage
Switch
Game/MIDI
Audio
Ethernet
USB
Keyboard/Mouse
Video Out
COM1
COM2
Parallel